|
|
| Lamp with deep vertical body. Broad rim with two deep grooves, central ridge higher, lip of filling hole concave. Long nozzle flat on top with wick hole at tip. Burning. Lustrous black glaze overall ... 1933/05/16 ... COLOSSAL ATTIC LAMP HOWLAND TYPE 26A |
| Two joining fragments preserve almost complete proile to within 0.01m. of center of floor. Flat-floored plate on broad low ring foot. The horizontal rim, convexly curved on top, is grooved on top and offset ... 5-15 May 1939 ... Plate Fragment: Type A |
Fragments of lower body missing.
Lug on top at left; two ridges around filling hole; raised base, concave beneath.
Greenish-black glaze, much worn.
Type IX of Corinth collection, type 43A of Agora collection ... 12 May 1939 ... type 43A of Agora ... missing.
Lug on top at left; two ridges around filling hole; |
| Much of handle missing, and chips.
Flat bottom, slightly concave. Shallow body with rounded sides. A heavy raised ring around the central opening. Horizontal band handle.
Top, nozzle, inside and handle ... 5 May 1938 ... slightly concave. Shallow body with rounded sides. A heavy ...
Top, nozzle, inside and ... In lab. for desalination (18.05.2017). |
Two non-joining fragments of neck preserved. Restored in plaster. Small concave foot; broad shoulder, forming an angle with squat body; lip concave above a ridge; neck and handles probably tall.
Pinkish ... 5 April 1937 ... body; lip concave above a ... Restored in plaster. Small concave foot; broad shoulder, ... Well, containers 33-37 (40, 43). |
Top of nozzle and its tip missing; also some of body; mended from two pieces.
Two unpierced lugs on upper half of body. Rather high plump body with ridge around filling hole. Raised base concave beneath ... 12 May 1939 ... collection, type 43A of Agora ...
Two unpierced lugs on upper ... Top of nozzle and its |
| Complete except for chips missing from raised ridge on top.
Raised disk base, concave below, no handle, semi-pierced lug on left side. Flat top sunken below lamp side wall.
Metallic black glaze flaking ... 1 July 1971 ... ridge on top.
Raised disk base, concave below, no ... red-buff clay.
Type 43B of ... Pyre. Layer 2a, Greek House δ; Room 9. |
Intact.
Low concave base; rounded body; ridge around filling hole; unpierced knob on side.
Unglazed outside and possibly inside. Mold made.
Yellow-buff clay.
Type VIIB of Corinth collection, type 42A ... 6 June 1938 ... collection, type 42A of Agora ... Intact.
Low concave base; rounded body; ridge |
Fragment from rim and nozzle.
A small bit of the ridged rim, the rounded sides, and the nearly flat, reserved foot, slightly concave in the center, preserved.
Excellent black glaze, inside and out.
Type ... 4 April 1933 ... type 24A of Agora ... nozzle.
A small bit of the ridged rim, the rounded sides, |
| On the down sloping rim, separated from the discus by a high ridge, a row of impressed circles.
Plain concave discus, with five holes.
Handle solid, double grooved above, single below.
Reverse, depressed, ... 22 March 1933 ... separated from the discus by a high ridge, a row of impressed circles.
Plain concave |
| Curved body with raised ridge around discus which is slightly sunken.
Vertical ribbon handle.
Foot slightly concave.
Nozzle flaring at end.
Buff slip.
Red clay.
Type XVI of Corinth collection, type 35D ... 30 March 1933 ... Agora IV, no. 483, p. 114, pls. 17, 43. |
Mended from seven pieces; partly strengthened in plaster. The lower part of the nozzle, and fragments of sides and bottom missing.
Watch-shaped body; the side wall continues upward to form a ridge around ... 17 March 1932 ... continues upward to form a ridge ... lamp is moulded in two ... Corinth collection, type 43D of |
Mended from several pieces; fragment from top of nozzle and rim, and part of side missing.
Small concave discus with rays; ridge around filling hole. On the rim, small raised beads; ridge around discus ... 25 February 1939 ... a leaf in relief within a ... pieces; fragment from top of ... side missing.
Small concave |
Convex sides.
On rim, herringbone.
Plain concave discus with raised ridge at outer edge.
Solid handle, with single groove above ending in a small circle at the discus, and with double groove below.
On ... 6 May 1933 ... herringbone.
Plain concave discus with raised ridge at outer ... single groove above ending in |
Nozzle and vertical band handle broken away.
On rim, small globules.
Small discus, concave, with central filling hole.
On bottom, circular ridge, enclosing the letter "A".
Thin red wash.
Light red clay ... 14 April 1932 ... concave, with central filling ... ridge, enclosing the letter "A".
Thin red wash.
Light |
Rim and body covered with small globules.
Plain discus, concave, with ridges round outer edge.
On nozzle, degenerate volutes affording transition to rim.
High vertical handle, grooved.
On bottom, narrow ... 5 May 1932 ... discus, concave, with ridges ... large "A".
Remains of ...
Dark red clay.
Type XX of |
Part of the right side missing. Miniature lamp.
Dots on rim; nozzle raised slightly above rim. Plain discus, sharply concave. Pierced handle, double grooved above, plain below. On the reverse, a leaf, ... 5 May 1936 ... sharply concave. Pierced ... a leaf, raised, between two circular ridges ... Cistern. Third century A.D. context. |
Handle and end of nozzle missing; small hole in base. Otherwise complete.
Base slightly concave. Large filling hole surrounded by a ridge. Raised rays on rim. Amorphous lug on left side.
Thin black glaze ... 3 May 1960 ... concave. Large filling hole surrounded by a ridge. Raised rays ... missing; small hole in base. |
Handle and bottom broken away.
Rim down sloping, merging with body which like the rim is covered with rows of small raised dots.
Plain discus, concave, with three concentric ridges near outer edge.
On ... 11 February 1932 ... concentric ridges.
Type XX of ...
Plain discus, concave, with three concentric ridges near |
Fragment of rim and body preserved.
A series of ridges and grooves around the sunken, concave rim. Horizontal band-handle.
Clay: fine reddish-buff; red glaze inside. Assembly Place, filling of Period ... 1932 ... Fragment of rim and body preserved.
A series of ridges ... sunken, concave rim. Horizontal |
Preserved is most of base and ca. one-third of rim and side wall. Three joining fragments.
Concave bottom leading to central tube. Concave upper and lower side walls meet at raised ridge. Flat rim banded ... 7 August 1968 ... tube. Concave upper and lower ...
Type 17A of Agora ... joining fragments.
Concave |
The nozzle broken off, and a part of the rim in front.
On the rim irregular raised spirals, with three shallow ridges next the discus, which is plain, concave. Semi-pierced handle, triple grooved in front, ... 31 May 1933 ... and a part of the rim in ... "A" in the center ... shallow ridges next the discus, |
Complete.
Raised globules on rim and body.
Small, sharply concave discus, plain, with two surrounding ridges.
Solid handle, triple grooved above, double below.
On reverse, two concentric rings, enclosing ... 17 May 1933 ... sharply concave discus, plain, with two surrounding ridges ... enclosing a small "K".
Unglazed. |
About a third of the lamp, including start of nozzle, preserved.
Bottom flat; wall has two faces, oblique-angled to each other, each face slightly concave; rim has two ridges, one about the hole and one ... 4 May 1939 ... collection, type 17A of Agora ... About a third of the ... face slightly concave; rim |
Complete except for vertical ring handle at back.
Jewelled ribs on upper body; parallel grooves and ridges on nozzle. Torch-shaped lug on left side. Raised base, concave beaneath. Raised band, jewelled, ... 20 October 1947 ... type 52A of Agora ...
Jewelled ribs on upper body; parallel grooves and ridges on |
| Rim plain, with two ridges at inner edge.
Small discus, sharply concave; rising at the outside to a broad ring which projects above the level of the rim.
Small nozzle, sharply set off from rim; slightly ... 5 May 1932 ... ridges at inner edge.
Small discus, sharply concave; rising at the outside to a broad |
Mended from many pieces; part of discus missing.
Narrow rim, ridged where it joins the plain concave discus. High-swung grooved vertical handle.
In relief on bottom inside a low base ring: "A".
Red glaze, ... 10 March 1936 ...
Narrow rim, ridged where it joins the plain concave ... vertical handle.
In relief on ... but in this deposit. |
Handle and nozzle broken.
Rim sloping outward slightly, merging with slightly curving body, both body and rim covered with small dots, raised.
Discus, small, concave, plain, surrounded by two ridges.
Vertical ... 23 July 1931 ... raised.
Discus, small, concave ... ridges.
Vertical band handle, ... "A".
Dull purplish-brown |
| Mended from three fragments; rim chipped and one side of the bowl missing for about one-third of the circumference. Bottom of bowl flat, forming a sharp angle with the high outwards curving sides. Foot ... 23 April 1932 ... Leica, 94-43-28a, 2-290, XXV-84, XXXIX-41 ... forming a sharp angle with the ... underside concave, with circular ridge around center.
Maker's |
| Type XXVII lamp with flat rim, ridge and moulding surrounding concave disk. Rim: ovules. disk: border of ovules, helmeted head of gladiator, facing lt. Trace of short sword above.See L-XXXX-1861 L-XXXX-1860 ... 2nd c ... LAMP BRONEER TYPE XXVII: GLADIATOR |
Fragment from right side of lamp.
Plain, flat rim, set off by two grooves from plain concave discus.
Rather long nozzle; pointed, with volutes on rim and a small ridge between.
No trace of handle at the ... 11 May 1932 ... plain concave discus.
Rather ... volutes on rim and a small ridge between.
No trace of |
Vertical handle broken away.
Rim and body covered with small globules.
Plain discus, concave, with ridges round outer edge.
On nozzle, degenerate volutes affording transition to rim.
Handle together with ... 5 May 1932 ... discus, concave, with ridges ... ring, enclosing large "A ... red clay.
Type XX of |
| Type XXVII lamp with sloping rim, ridge framing concave disk. Rim: panels, ovules. disk: bearded head of man directed rt. and bending down so that head level with rt. panel on rim. Fine buff clay with ... 2nd c ... LAMP BRONEER TYPE XXVII |
| Type XXVII lamp with flat rim, ridge framing concave disk, with moulding surrounding disk; tiny fill hole along edge of disk. Rim: panels, ovules; disk: ovules on moulding. See L-XXXX-1860 L-XXXX-1861 ... 2nd c. A.C ... LAMP BRONEER TYPE XXVII |
| Lamp with concave low disk base, straight flaring body curving up to broad, sloping rim, deeply concave disk offset by ridge and groove, small off-center fill hole, tiny slit air-hole at base of nozzle ... 1st c. A.C ... Lamp with concave low ... sloping rim, deeply concave disk offset by ridge and |
Mended from several pieces; the end of the nozzle missing and fragments from the bottom.
Flat sunken discus, surrounded by a ridge, rim plain save for two knobs; angular shoulder; slightly concave base ... 13 June 1939 ... its top a deep groove in ... surrounded by a ridge, rim plain ... shoulder; slightly concave base |
Two non-joining pieces.
Fragment a), mended from two pieces, preserves part of side and bottom with part of discus and rim and base of nozzle. Very low raised base.
Fragment b), mended from two pieces, ... April 1948 ... P.L. a) 0.083, b) 0.075; H. a) 0.026, b) 0.026 |
| Type XXVII lamp with flat rim, ridge surrounding deeply concave disk with central fill hole, surrounded by 2 rings; incompletely pierced air hole at base of raised panel framing nozzle. Rim: ovules; disk: ... 2nd c. A.C ... 2nd c. A.C ... 2nd c. A.C. |
| Fragments missing from the body. Restored in plaster. Broad ring base. Squat bulging body, set off from concave shoulder by a light ridge. Narrow neck. Broad mushroom-shaped rim. Ring handle, double grooved, ... February 1936 ... concave shoulder by a light ridge. Narrow neck. Broad ... the body. Restored in ... Leica, 90-13-11a, 82-530 |
| Mended from several pieces; about half preserved. Concave side wall with rim inset to take lid; broad curving flange at bottom, with moulded ridge underneath it. Ring foot set well in.
Black glaze much ... 22 May 1939 ... Black and Plain Pottery | Pyxis | Type C |
|
|
