|
|
| From a lateral horizontal cornice, a cyma reversa soffit molding with a vertical fascia high above it. The nosing molding is much battered; possibly an ovolo. In the top two rafter cuttings, and at each ... 10 May 1937 |
| Right end broken; a part of a curved joint surface at the other end. Underside worked to be visible. In underside toward end with curved joint surface a cutting and part of the iron of a Π-clamp. Outside ... 1933 |
| Corner block. The face is picked, and shows no drafting at foot of step. The working of the anathyrosis band is not very smooth, but rather picked. At edge of joint is a smooth worked surface, not sunk ... 1933 |
| Top surface shows practically no wear but bottom is badly worn by reuse as a paving block.
Both ends show clamp position scratched on, and further back the clamps as executed.
Same workmanship and series ... 1933 |
| Corner. The shorter face of the block is less well finished than the longer, hence probably faced side of building. Rectangular dowels with pour channels for column base whose diameter was about 0.56m ... 1933 |
Rectangular dowel in bottom.
Rectangular dowels for column base in top, with pour channels. Lower part of back of block projects irregularly, showing how deep paving slabs were, ca. 0.20-0.25m.
Blue Hymettian ... 1933 |
A 138 (Ζ 30) - A 144 (Ζ 36) are from the same series.
Right end of this block probably joins A 144.
Blue Hymettian marble.
Found at G/15-12/17 (Fall 2016). Pre-excavation, demolition of house 632β/16 ... 1933 |
Dowel in right end for course above still retains head. Iron hard to trace. The clamp at this end also retains some lead, both being worn down with surface of block by reuse.
Blue Hymettian marble.
A 138 ... 1933 |
|
|
