|
Fragment of a flat-bottomed clay mold for shaft and triangular head of a bronze pin (?)
Soft yellow clay.
The mold was apparently made in two parts for the top edges seem to be original. Fragment of somewhat ... 9 June 1936 |
| Two joining fragments.
For small circular object with projecting knob which was concave on top. A lid (?)
Thin gritty red clay on outside, heavy metal deposit on inside. Workshop. 4th c. A.D. Lot Λ 199b ... 9 June 1936 |
Two joining fragments of one end of heavy mould. On the inside a smooth curved surface for a round-bottomed bowl (?)
Heavy yellow fabric. Larger fragment blackened on outside.
At the end or side, about ... 9 June 1936 |
| Corner of mold for small rectangular object.
Note the raised bar in center, which ould look like a large indented Iota on the positive.
Thin yellow to red fabric.
Sherds from same fill in Box 200 C. Workshop ... 9 June 1936 |
Mold fragment with oval collar mouth with raised lip, and oval pour channel.
Below a curved surface with flat edge.
Mold for a bowl (?)
Light yellow clay, burnt black in some parts. Burnt layers above ... 9 June 1936 |
| An oval collar mouth with raised lip with pour channel or vent hole.
The latter divides; on line of break at bottom at one side a circular channel, at the other a rectangular one.
A small Delta on the ... 9 June 1936 |
| One section, broken at end, mended from four pieces.
Rectangular terracotta brick, made of coarse powdery red clay.
Horizontal curve, heavily vitrified on interior surface.
Two preserved edges are smooth; ... 8 June 1936 |
Lump of waste material containing corroded bronze, charcoal, earth pebbles. Catalogued 5 May 1973 Debris layer over floor of apsidal workshop. Lot Λ 198a. 1218 Leica ... 9 June 1936 |
|
|